Ribbon: Catenary Design > Cross Span
With this function you can delete already applied
cantilevers.
Intention
|
Delete an existing cantilever.
|
Instructions
|
- Run the Create
Multi Track Cross Arm function.
- Select the holder
(e.g. pole) for the Multi track cross arm.
- Select the
support point, which should be associated to the Multi track cross arm.
- Run the Create
Multi Track Cross Arm function. .
- Insert the
relevant parameters into the edit fields. The ID will be automatically assigned
from Sicat Master. The distance between cross-arm brackets and pole will also
be predefined.
- Confirm your
entries with OK.
|
Result
|
Sicat Master creates a multi track arm, a drop
tube which is fixed at the multi track arm, and the cantilever. The data will
be saved in the database.
|
Between holder and support point a connection line appears
in the graphics. The function positions the cross arm drop tube exactly in the
middle between both rails. With suitable moves and edit functions the position
of the cross arm drop tube can be changed afterwards. With the function Align
the cantilever and the multitrack cross arm can be aligned vertical to the
track.
Note: If there was
multitrack cross arm chosen as a holder while creating the cantilever, the
program will automatically apply a new multitrack cross arm drop tube and will
connect it to the new cantilever.